{{item.Desc}}
HP ISR4451-X-VSEC/K9 Genel Bakış
Product Code
ISR4451-X-VSEC/K9
Bundle
w/SEC and voice licenses
Aggregate Throughput
1 Gbps to 2Gbps
Total onboard WAN or LAN 10/100/1000 ports
4
RJ-45-based ports
SFP-based ports
Enhanced service-module (SM-X) slot
2
NIM (Network Interface Modules) slots
3
Onboard ISC slot
1
DDRM (data plane)
2 GB (default) / 2 GB (maximum)
DDRM (control/services plane)
4 GB (default) / 16 GB (maximum)
Flash Memory
8 GB (default) / 32 GB (maximum)
Power-supply options
Internal: AC, DC (roadmap) and PoE
Rack height
2 RU
Dimensions (H x W x D)
88.9 x 438.15 x 469.9 mm
Note:
①
AC power supply unit (PSU0)
④
Router power On/Off switch
②
Router fan tray
⑤
LEDs
③
AC power supply unit (PSU1)
·Router fan tray is hidden behind removable bezel.
·LEDs include 12 indicators.
Figure 3 shows the back panel of Cisco ISR4451-X-VSEC/K9.
USB Type A port
Auxiliary port
GE management port
⑥
GE Ports
USB Type B mini port
⑦
NIM Slots
Console port
⑧
SM-X Slot
·The NIMs support 2 single-wide or 1 double-wide.
·The GE Ports include 4 RJ45 ports and 4 SFP ports.
Table 2. Voice Security Bundle Features Table
Authentication andEncryption Features
• Media encryption of voice RTP streams using SRTP
• Exchange of RTP Control Protocol (RTCP) information using secure RTCP
• SRTP to RTP fallback for calls between secure and insecure endpoints
• Secure calls supported in Cisco Unified Survivable Remote Site Telephony (SRST) mode during WAN failover
• Compressed RTP (CRTP) supported with media encrypted calls using SRTP
Authentication andEncryption Algorithm
• Supports AES-128 encryption algorithm
• Supports the HMAC secure hash authentication algorithm (SHA 1)
Signaling Authentication and Encryption Features
• Gateway to Cisco Unified Communications Manager signaling and encryption uses IPSec for Media Gateway Control Protocol (MGCP), H.323 and SIP gateways
• IP phone to Cisco Unified Survivable Remote Site Telephony router signaling and encryption uses TLS (Transport Layer Security)
Protocol Support
• MGCP 0.1 (supports MGCP gateways with Cisco Unified Communications Manager)
• H.323 (supported on H.323 gateways and CUBE; Cisco Unified Communications Manager interoperability is optional)
• Session Initiation Protocol (SIP)
• SCCP (Cisco Unified IP Phone) in SRST mode
Module Support
• Any module that has PVDM2, PVDM3 and/or built-in DSP
Codec Support
• G.711, G.729A, and G.729
Description
Cisco ISR 4451 VSEC Bundle, PVDM4-64 w/ UC,SEC Lic,CUBE- 25
Enhanced service-module slots
Doublewide service-module slots
1 (assumes no singlewide SM-X modules installed)
NIM slots
OIR (all I/O modules)
Yes
Default memory double-data-rate 3 (DDR3) error-correction-code (ECC) DRAM
(Combined control/services/data planes)
NA
Maximum memory DDR3 ECC DRAM (Combined control/services/data planes)
Default memory DDR3 ECC DRAM (data plane)
2 GB
Maximum memory DDR3 ECC DRAM (data plane)
Default memory DDR3 ECC DRAM (control/services plane)
4 GB
Maximum memory DDR3 ECC DRAM (control/services plane)
16 GB
Default flash memory
8 GB
Maximum flash memory
32 GB
External USB 2.0 slots (type A)
USB console port -type B mini (up to 115.2 kbps)
Serial console port - RJ45 (up to 115.2 kbps)
Serial auxiliary port - RJ45 (up to 115.2 kbps)
Internal: AC, DC and PoE
Redundant power supply
AC input voltage
100 to 240 VAC autoranging
AC input frequency
47 to 63 Hz
AC input current range, AC power supply (maximum)
7.1 to 3.0A
AC input surge current
<50 A
Typical power (no modules) (watts)
158
Maximum power with AC power supply (watts)
450 (no PoE)
Maximum power with PoE power supply (platform only) (watts)
1000 with PoE redundant
1450 with PoE boost no redundancy
Maximum endpoint PoE power available from PoE power supply (watts)
500 W with optional redundancy
Maximum endpoint PoE power capacity with PoE boost (watts)
950 W no redundancy
Yönetim yanıtı {{review.ReplyText}} {{review.Signature}}