{{item.Desc}}
Cisco ISR4321-VSEC/K9 Router Özellikleri
Product Code
ISR4321-VSEC/K9
Aggregate Throughput
50 Mbps to 100 Mbps
Total onboard WAN or LAN 10/100/1000 ports
2
RJ-45-based ports
SFP-based ports
1
NIM (Network Interface Modules) slots
Onboard ISC slot
Memory
4 GB (default) / 8 GB (maximum)
Flash Memory
Power-supply options
External: AC and PoE
Rack height
1 RU
Dimensions (H x W x D)
44.55 x 369.57 x 294.64 mm
Package Weight
9.19 Kg
Note:
①
Grounding
⑦
GE 0/0/1 (copper cable) port
②
Power switch
⑧
GE 0/0/0 SFP (fiber-optic) port
③
Power input connector
⑨
NIM slots
④
GE “MGMT” port (with USB port below)
⑩
GE 0/0/0 RJ-45 (copper cable) port
⑤
USB Type B mini port
⑪
Auxiliary port
⑥
Console port
·The NIMs support 2 single-wide or 1 double-wide.
Table 2. Voice Security Bundle Features Table.
Authentication andEncryption Features
• Media encryption of voice RTP streams using SRTP
• Exchange of RTP Control Protocol (RTCP) information using secure RTCP
• SRTP to RTP fallback for calls between secure and insecure endpoints
• Secure calls supported in Cisco Unified Survivable Remote Site Telephony (SRST) mode during WAN failover
• Compressed RTP (CRTP) supported with media encrypted calls using SRTP
Authentication andEncryption Algorithm
• Supports AES-128 encryption algorithm
• Supports the HMAC secure hash authentication algorithm (SHA 1)
Signaling Authentication and Encryption Features
• Gateway to Cisco Unified Communications Manager signaling and encryption uses IPSec for Media Gateway Control Protocol (MGCP), H.323 and SIP gateways
• IP phone to Cisco Unified Survivable Remote Site Telephony router signaling and encryption uses TLS (Transport Layer Security)
Protocol Support
• MGCP 0.1 (supports MGCP gateways with Cisco Unified Communications Manager)
• H.323 (supported on H.323 gateways and CUBE; Cisco Unified Communications Manager interoperability is optional)
• Session Initiation Protocol (SIP)
• SCCP (Cisco Unified IP Phone) in SRST mode
Module Support
• Any module that has PVDM2, PVDM3 and/or built-in DSP
Codec Support
• G.711, G.729A, and G.729
Description
Cisco ISR 4321 Bundle w/UC & SEC License. CUBE-10
Enhanced service-module slots
0
Doublewide service-module slots
OIR (all I/O modules)
Yes
Default memory double-data-rate 3 (DDR3) error-correction-code (ECC) DRAM
(Combined control/services/data planes)
4 GB
Maximum memory DDR3 ECC DRAM (Combined control/services/data planes)
8 GB
Default memory DDR3 ECC DRAM (data plane)
NA
Maximum memory DDR3 ECC DRAM (data plane)
Default memory DDR3 ECC DRAM (control/services plane)
Maximum memory DDR3 ECC DRAM (control/services plane)
Default flash memory
Maximum flash memory
External USB 2.0 slots (type A)
USB console port -type B mini (up to 115.2 kbps)
Serial console port - RJ45 (up to 115.2 kbps)
Serial auxiliary port - RJ45
(up to 115.2 kbps)
Redundant power supply
N/A
AC input voltage
100 to 240 VAC autoranging
AC input frequency
47 to 63 Hz
AC input current range, AC power supply (maximum)
1.5 to 0.6A
AC input surge current
90 A peak and less than 3 Arms per half cycle
Typical power (no modules) (watts)
36
Maximum power with AC power supply (watts)
125
Maximum power with PoE power supply (platform only) (watts)
260
Maximum endpoint PoE power available from PoE power supply (watts)
120
Yönetim yanıtı {{review.ReplyText}} {{review.Signature}}